Here is a list of NEW parts that are installed on every game. This list is just the minimum of new parts added to the game to make it as fresh and clean as just coming out of the box. Other parts are added on a game as needed for that specific game. All broken parts that are still available are replaced and any part not available will be repaired or re-produced if possible. We do this work to my personal machines so it is only natural to keep the work consistent to ALL machines even those that are for sale.
For games that need that extra touch, we also add the modifications where they are available. The Champion Pub machine for example, does NOT come with the gold trim but we believe that the gold trim plays an important part in making that particular machine look awesome. So of course we had to add that to the game. This is the reason that each game is unique and needs to be treated as such.
- New Parts:
- 4 Legs
- 4 Leg levelers
- 8 Leg bolts
- Lamps
- Balls
- Rubbers
- Flipper bats
- Flipper buttons
- Shooter Rod
- Bullet Protectors
Here is a list of the common work done on all machines. This list is just the minimum work that is done as each machine is unique so to is the work to make it as new as possible.
- Game Cabinet:
- Wipe clean Outside
- Vacuum and wipe clean inside
- Clean playfield glass molding
- Touch-up Cabinet scuffs with matching paints
- Replace side rails if bent
- Inspect ground strap
- Inspect all cabinet fuses for correct amperage
- Re-Finish/Polish coin door
- Playfield Topside:
- Strip completely for cleaning
- Replace all topside lamps
- Clean and polish under playfield apron
- Clean and polish all plastic
- Replace all rubbers
- Replace drop target stickers
- Apply minimum 2 coats of wax/novus #2
- Apply bullet protectors under sling plastics
- Clean and polish ALL metal gates, wire forms, post, etc.
- Playfield Underside:
- Wipe down underside wood
- Clean all inserts
- Complete flipper re-build
- Replace all underside lamps
- Inspect and re-solder all broken joints
- Backbox:
- Wipe clean inside
- Clean Translight/Backglass
- Replace all lamps
- Inspect all plugs for corrosion
- Inspect all fuses for correct amperage
- Repair boards if needed
